AC TECH

SMVector Drives - Standard Enclosure

Our most technically advanced inverter drive continues Lenze - AC Tech's tradition of innovative compact inverter design. The performance and flexibility make the SMVector an attractive solution for a broad range of AC Motor applications and with several communications protocols available, networking drives and components into a system solution can be done now or in the future.

The SMVector NEMA 1 (IP31) is the most common and cost effective drive enclosure for a wide range of applications including packaging, material handling / conveying, positive displacement pumping, and HVAC systems.

• NEMA1 (IP31)
• 120V - 600V
• 0.33 to 60HP ( 0.25 - 45 kW)

SMVector Drives - Washdown Enclosure

Our most technically advanced inverter drive continues Lenze - AC Tech's tradition of innovative compact inverter design. The performance and flexibility make the SMVector an attractive solution for a broad range of AC Motor applications and with several communications protocols available, networking drives and components into a system solution can be done now or in the future.

The SMVector NEMA 4X (IP65) is available in two enclosure materials - for indoor only use and for indoor/outdoor use. These rugged enclosure options are ideal for many industries including food / beverage, waste water, chemical metering and processing, and pharmaceuticals.

• NEMA 4X (IP65)
• 120V - 600V
• 0.33 to 30HP ( 0.25 - 22kW )
• Open-loop Vector, V/Hz

SMVector Drives - Washdown Enclosure

Our most technically advanced inverter drive continues Lenze - AC Tech's tradition of innovative compact inverter design. The performance and flexibility make the SMVector an attractive solution for a broad range of AC Motor applications and with several communications protocols available, networking drives and components into a system solution can be done now or in the future.

The SMVector with Integral Disconnect is available in a rugged NEMA 4X (IP65) indoor enclosure ideal for many industries including food / beverage, waste water, chemical metering and processing, pharmaceuticals and more… The integral disconnect switch offers the ability to isolate the motor for maintenance and servicing. Also – the disconnect switch handle is lockable and is made of red and yellow materials for high visibility.

• NEMA 4X (IP65)
• Integral Motor & Drive Disconnect
• 0.33 to 30HP ( 0.25 - 22kW )
• Open-loop Vector, V/Hz

Enclosed V/f Control (Constant Torque)

The MC Series drives are built in rugged steel enclosures that hold up to daily life on the factory floor. The easy to read 16 character LCD display above the drive keypad allows for easy and intuitive set up as well as daily operation.

• 1/4 through 150HP (0.18 - 110kW)
• Input voltages from 120V single phase (with voltage doubler) to 590VAC
• NEMA Type 1, 12, 4 and 4X Enclosures

This constant horsepower drive can be set up for simple applications requiring ramped start, ramped stop and speed control to demanding applications that require PID set-point control and many other functions. The MC Series consists of the MC1000 and MC3000 models; most applications will use the MC1000 with a keypad that includes Start, Stop, up, down, forward/reverse, Program/Run, Auto/Manual and Enter buttons. For non-reversing applications that require independent switching of start and stop from local to remote and speed control from auto to manual, the MC3000 series keypad replaces the forward/reverse button with Local/Remote.

SCF Frequency Inverters - IP20 V/Hz Control

The compact packaging and comprehensive functionality make the SCM and SCL an ideal drive solution for use on equipment requiring variable speed, soft starting or reversing operation. The SCM Series can be used with 3-phase AC induction motors rated from 1/3 HP up to 15HP (0.25 - 11 kW) on voltages from 120V single-phase to 480 V three-phase. The SCL is for 240V single-phase inputs up to 3 HP (2.2 kW).

These easy to use drives are configured and ready to use right out of the box for most simple applications. By simple reprogramming, the SCM and SCL will perform many application specific tasks such as multiple preset speeds, electronic braking and motor jogging to name a few. Like all AC Tech sub-micro drives, the SCM and SCL drives use the EPM memory technology for fast and efficient programming.

The SCL frequency inverter includes an integral line filter to comply with the relevant European Union standards for EMC and RFI levels. These drives are identical in all other respects.

• 120V - 480V
• 0.33 to 16HP ( 0.25 to 11kW )
• IP20
• V/Hz

SCF Frequency Inverters - IP20 V/Hz Control

This truly flexible sub-micro drive gives you the compact size you need for your panel layout while delivering on the functions and features your process demands. The SCF Series can be used with 3-phase AC induction motors rated from 1/4 HP up to 30HP (0.18 - 22 kW) on voltages from 120V single-phase to 590 V three-phase.

With 18 isolated terminals (5 logic inputs, 2 logic outputs, 2 analog inputs and 2 analog outputs plus RS485 Modbus Serial Communication), the SCF Series is ideal for motion control applications from the simple to the complex.

Like all AC Tech sub-micro drives, the SCF Series drives employ the EPM memory technology for fast and efficient programming.

• 120V - 590V
• 0.25 to 30HP ( 0.18 to 22kW )
• IP20
• Modbus RTU, V/Hz

SCD Frequency Inverters - IP20 V/Hz Control

The smallest most competitively priced inverter drive with DeviceNet built in!

This truly flexible sub-micro drive gives you the compact size you need for your panel layout while delivering on the functions and features your process demands. The SCD Series can be used with 3-phase AC induction motors rated from 1/4 HP up to 30HP (0.18 - 22 kW) on voltages from 120V single-phase to 590 V three-phase.

The removable DeviceNet terminal block makes it easy to integrate into motion control applications from the simple to the complex.

Like all AC Tech sub-micro drives, the SCD Series drives employ the EPM memory technology for fast and efficient programming.

• 120V - 590V
• 0.25 to 30HP ( 0.18 to 22kW )
• IP20
• DeviceNet, V/Hz

SMD Frequency Inverters (BASIC I/O) - IP20 V/Hz Control with Basic I/O

The smd series was designed to address the needs of a simple V/Hz drive that was suited for a global marketplace. The smd drives are consistent with the Lenze 8200 inverter drives in their design and packaging concepts and are manufactured to comply with applicable EU standards for industrial installations of electric motor drives.

The smd inverter drive provides advanced technology and high quality at a reasonable price. There is no need to compromise with an smd drive. It includes all the digital and analog inputs and outputs that most applications would require along with functional flexibility.

The smd with basic I/O is an IP20 enclosed drive available from 0.25 to 4kW for input voltages of 200/230V 1 or 3 phase. 10 I/O terminals provide speed reference plus programmable inputs and relay output.

These easy to use drives are configured and ready to use right out of the box for most simple applications. By easy reprogramming right from the front of the drive (additional keypad is not required), the smd will perform many application specific tasks such as multiple preset speeds, electronic braking and motor jogging to name a few. The smd drives use the EPM memory technology for fast and efficient programming.

• 200-240V
• 0.33 to 5HP ( 0.25 to 4kW )
• IP20
• V/Hz

SMD Frequency Inverters (FULL I/O) - IP20 V/Hz Control with Full I/O

The smd series was designed to address the needs of a simple V/Hz drive that was suited for a global marketplace. The smd drives are consistent with the Lenze 8200 inverter drives in their design and packaging concepts and are manufactured to comply with applicable EU standards for industrial installations of electric motor drives.

The smd inverter drive provides advanced technology and high quality at a reasonable price. There is no need to compromise with an smd drive. It includes all the digital and analog inputs and outputs that most applications would require along with functional flexibility.

The smd with full I/O is an IP20 enclosed drive available from 0.37 to 22kW for input voltages of 200/230V 1 or 3 phase and 400/480 VAC 3-phase. 15 I/O terminals provide speed reference plus programmable analog and digital inputs and outputs as well as a relay output. RS-485 Modbus RTU / LECOM communications are standard as well. CANopen Variants are also available.

These easy to use drives are configured and ready to use right out of the box for most simple applications. By easy reprogramming right from the front of the drive (additional keypad is not required), the smd will perform many application specific tasks such as multiple preset speeds, electronic braking and motor jogging to name a few. The smd drives use the EPM memory technology for fast and efficient programming.

• 200-480V
• 0.5 to 30HP ( 0.37 to 22kW )
• IP20
• V/Hz